Home > Electrical > Fronus PV 5200 Hybrid Inverter Price in Pakistan 2024, 24 volt, Net Metering, Backup Time, Specifications

Fronus PV 5200 Hybrid Inverter Price in Pakistan 2024, 24 volt, Net Metering, Backup Time, Specifications

Fronus PV-5200 Inverter Hybrid On Grid

Price in Pakistan 2024: Rs. 139000

Max. Solar Charging Current


Fronus PV 5200 Single-Phase Inverter Overview:

This Platinum series Fronus PV 5200 hybrid inverter can support solar panels up to 6200 watts. Frnous PV 5200 Inverter Price in Pakistan 2024 is 139000 and you can also get a special discount after the bargain. This single-phase on-grid inverter from the Fronus brand is capable of net metering, which supplies extra solar energy to the grid station and you can consume these units without paying the WAPDA. This is a pure sine wave and provides the best conversion of DC to AC. Complete Fronus PV-5200 specifications are mentioned below.

This 24-volt hybrid inverter model in Pakistan has many protections including over-temperature, short circuits, overload, solar input lightning, and overcharge. You can also attach a generator with this single-phase 3600-watt inverter for supplying uninterrupted electricity to different types of equipment. This hybrid inverter provides an efficiency of up to 98%. In our point of view, this model gives the best efficiency and almost all the features at a cost-effective price and the company provides 5 years of warranty including 2 years free parts warranty.


Longi Solar Panels Price List 2024

You can control the functionality of this Fronus device and monitor its performance from the mobile phone application while connecting the device to the wifi. You can download the application from the Google Play Store and Apple Store. Its smart battery charge design increases the lifespan of batteries.

Sometimes due to the malfunction of a Fronus PV 5200 an error comes, which stops the functionality of a hybrid inverter. You can check the fault code table for the reason below. The MPPT range of this device is between 90V to 450VDC and the battery voltage range is 40 volts to 60 volts. This model can also work without a battery, This is the best option if you are planning to install a solar panel system without a battery. You can attach batteries at any time with your hybrid net metering system.

This smart solar inverter power can be used to give electricity to different types of home appliances including 1 Ton or 1.5 Ton Air Conditioner, Water-Pump, energy savers, light bulbs, fans, refrigerator, LED, Laptop, Mobilephone, and other home or office devices.

A detailed user manual comes with this solar inverter. You should install the DC circuit breaker between the device and the solar panels.  It is built with an IP65 waterproof design, which is resistant to bad weather. It also has a dual output for light and heavy loads of appliances in your home or office. You can install two batteries with it and it also supports a lithium-ion battery.

Fronus PV 5200 Hybrid Inverter Price in Pakistan 2024, 24 volt, Net Metering, Backup Time & Full Specifications

ModelFronus PV 5200 Platinum Series Hybrid Inverter
Capacity (Watts)3600 watt
Max. Charging Current120 Ampere
Solar Charger Type
Max. MPPT Panel Support
6200 watt
Rated Output Power3600 watt / 3600 VA
Start-up Voltage90 VDC / 120 VDC
DC Voltage Range (Full Load)90 volt ~ 450 Volt DC
Charging Curve3 Stages
Max.Input Current
23 Ampere
Battery Voltage24-volt system
Net MeteringYes – On Grid
Maximum Charging Current120 Ampere (Solar to AC)
Maximum AC Charging Current100 Ampere
Output Wave FormPure sine wave
Auto ChargeYes
Auto RestartYes
Touch ButtonYes
Output Power Factor
Anti-Dust Kit
Charging Algorithm3-Step
Bulk Charging Voltage29.2 volt (Flooded Battery), 28.2 (Gel Battery/ AGM Battery)
Floating Charging Voltage
27 Vdc
Maximum Efficiency Solar to AC
Protection Degree
Operating Voltage Range
-10°C to 50°C
Storage Temperature
-15°C to 60°C
5% to 95% Relative Humidity
Efficiency (DC to AC)
Air filter Foam
Dustproof case
Cooling Fan
Heat sink
AC Input Data (OFF Grid Operation):
Surge Power
7200 watt
AC Start-up Voltage
120-140 VAC
Max. AC Input Current30 Ampere
Frequency and Voltage50/60Hz; 220/230/240Vac (Single phase)
Acceptable Input Voltage Range
Panels Input Data:
Max. Solar Panel Array Power
6200 watt
MPPT Range90-450 volt DC
Nominal PV Voltage240 volt DC
No. of MPPT Trackers
Maximum Charging Current
120 Ampere
Transfer Time10 ms UPS, 20 ms Appliances
Feed-in Voltage Range (Grid)195 ~ 253 VAC
Nominal Output Voltage
220/230/240 VAC
Maximum Efficiency (Conversion)
Power Factor Range
Grid Output (AC):
Output Voltage Range195.5~253VAC
Output Voltage (Nominal)
220/230/240 VAC
Output Current (Nominal)
15.7 Ampere
Feed-in Grid Frequency Range
Power Factor>0.99
Anti-islanding ProtectionYes
N.W (KGS)9 Kilograms
13.8 x 16.5 x 4.5 (Width x Height x Depth ) inches
Warranty5 years (2 years product &  5 years service warranty)
Disclaimer: We cannot guarantee that the Specs/Prices on this page are 100% correct (Human error is possible). For correct info. always visit the nearest local shop.
  • This price is valid in all cities of Pakistan including Karachi, Lahore, Islamabad, Faisalabad, Multan, Rawalpindi, Hyderabad, Gujranwala, Bahawalpur, Peshawar, Sargodha, Sialkot, and Quetta.
  • You can buy online in Pakistan and also from local shops in different cities in Pakistan. You can also avail of the options of Cash on Delivery (COD) of this product from different online stores OLX, Daraz, etc.

Fronus Inverter PV 5200 Fault / Error Codes & Fault Reason:

You can check the Fronus inverter different error codes with their fault reason by reading the error on your inverter screen.

Fault CodeFault Reason
01The fan is locked. When an inverter is off.
02Over Temperature
03The battery voltage is too high.
04The battery voltage is too low.
05Over temperature or output short-circuited
F06The output voltage is too high.
F07Overload time out.
F08The bus voltage is too high.
F09Failed of Bus soft start.
51Surge or Over Current.
52The bus voltage is too low.
53Failure of Inverter soft start.
55Over DC voltage (AC output).
57Failure of the current sensor.
58Too low of Output voltage.
59PV voltage is over limitation.

PV 5200 Warning Indicator:

You can check different Fronus inverter warning lights with their fault reason by reading the error on your device screen.

Warning CodeWarning EventAudible Alarm
01The fan is locked when an inverter is onBeep three times every second
03The Battery is over-chargedBeep once every second
04Low batteryBeep once every second
07OverloadBeep once every 0.5 second
10The output power deratingBeep twice every 3 seconds
15PV energy is lowBeep twice every 3 seconds
E9Battery equalizationNone
bPThe battery is not connectedNone

PV 5200 Backup Time (Approximate):

From the below table, You can check the backup time of the PV 5200 model with an electricity load of different wattages. This is an approximate backup time because backup time depends on the battery age, condition, external temperature, and other factors.

LOAD (wattage)
Backup Time @24Vdc 100ah (minute)
Backup Time @24Vdc 200ah (minute)


Fronus PV 5200 Inverter Features:

  • 220-volt Single-phase
  • Pure sine wave
  • 120-ampere maximum panel charging.
  • Work with and without battery
  • Can be monitored via Mobile Application (SolarMan Application)
  • Upgraded MPPT
  • Smart battery charger design
  • Auto restart while AC is recovering
  • On-grid (Net metering)
  • Programmable multiple operation modes: On-grid, off-grid, and UPS.
  • Programmable supply priority for battery or grid.
  • Configurable AC/Solar/Generator Charger priority by LCD setting.
  • Short Circuit/Overload/Over temperature protection.
  • WIFI monitoring
  • Compatible with generator power or main voltage
  • Built-in anti-dust kit

Data Sheet / Specifications via the image:

You can read the specifications of the Fronus PV 5200 hybrid inverter model via this image.

Fronus PV 5200 Specifications Datasheet

Battery Connection:

For the safety of the solar inverter system, you must use the proper battery cable size.

ModelPV 5200
Wire Size1 x 2 AWG
Cable25 (mm2)
Torque Value (Max.)2 Nm

Panel Connection:

For the safety of the solar inverter system, you must use the proper cable from the solar panel to the device.

ModelPV 5200
Wire Size1 x 12 AWG
Cable4 (mm2)
Torque Value (Max.)1.2 Nm

Display Panel Operation:

The PV 5200 display has four operation keys to control the functionality of an inverter and three indicator lights. The LCD display shows different functions of input and output power, Error codes, and other useful functions.

Function Keys:

ESCThe exit of the settings mode
UPTo go to the previous selection
DOWNTo go to the next selection
EnterEnter settings mode, To confirm the selection

LED Indicator:

Light ColourLEDIndicatorDetail
GreenINV / ACSolid OnThe output is powered by utility inline mode.
GreenINV / ACFlashingThe output is powered by a battery or Panel in battery mode.
GreenCHGSolid OnThe battery is fully charged
GreenCHGFlashingThe battery is charging
RedFaultSolid OnA fault occurs in the device
RedFaultFlashingA warning condition occurs in the device

Inverter Connection and Parts Overview:

  1. LCD display (Shows different settings and current situation)
  2. Functions Buttons
  3. Fault indicator
  4. Status indicator
  5. Charging indicator
  6. Battery input
  7. Main output
  8. AC input
  9. PV input
  10. Second output
  11. RS-232 communication port / Wifi port
  12. Anti-dust kit


  • Install it on a solid surface
  • Installation should be in a vertical position.
  • For proper air circulation, the distance between the right and left sides should be at least 10 inches, and from above and below the device should be at least 22 inches.
  • Do not install, near the flammable area
  • The room temperature should be between 0°C to 55°C to ensure best performance.

PV 5200 Battery Connection:

Inverter’s positive terminal should be connected with the positive terminal of the first battery and this battery’s negative terminal should be connected with the positive terminal of the second battery and this battery’s negative terminal should be connected with the negative terminal of the inverter.

Fronus Inverter Wifi:

A QR code sticker comes with each inverter for downloading the mobile application. You can scan this QR code from your mobile phone camera and download the “SmartESS APP” After installing the application, you have to scan the serial number from the QR code sticker, which is situated sidebar of the device. Complete steps are


    1. Install the application “SmartESS APP”
    2. Click on the registration
    3. Scan the QR code or serial number from the Application
    4. Input user name (any)
    5. Input Password
    6. Enter your email address
    7. Enter your mobile phone number
    8. Check the user agreement and privacy policy and hit register.
    9. Go to the Main screen
    10. Select Wi-Fi configuration. Select the device model.
    11. Enter Password “12345678” and click OK. Then click “on the system connection”.
    12. Choose your inverter’s Wi-Fi.
    13. Login with your credential
    14. Select Datalogger
    15. Your device number and datalogger should be there.
    16. Choose Datalogger and now you can see your device’s different values.

Anti-Dust Kit:

Anti-dust kit is preinstalled from the factory in an inverter. This kit protects the device from dust and increases machine performance in harsh environments. You should clean the dust filter foam every month. Steps to clean the dust filter.

  1. open the screw counterclockwise direction
  2. Take out the dust-proof case and take out the air filter foam
  3. Clean the dustproof case and air filter foam
  4. Re-assemble the dust kit back to the inverter

Features via the image:

Fronus PV 5200 Features

In the package:

Fronus Hybrid Inverter PV-5200
User Manual1
Wifi Plug1
Warranty Card
Stainless steel mounting screws M6*12
Wall mounting Bracket1
Wrench (L-type Hexagon)
Battery Sensor

Fronus Inverter Warranty:

The company provides 5 years of warranty including 2 years of product and 5 years of service. You can claim this warranty from your local dealer.


Different models are available in the market of Pakistan and these model names are PV 2200, PV 3200, PV 5200, PV 7200, PV 9200, Platinum 12200 VA, Xeon Advance 1.4 KVA, Xeon Advance 2.5 KVA, Xeon Plus 2000 VA, Xeon Plus 3200 VA, Infineon Plus 3.6 kW, Infineon Plus PV 4000, Infineon Plus 4.2 kW, Infineon Plus PV 5000, Infineon Plus 6 kW, Infineon Plus PV 7000, Bat Series 4.0, Bat Series 6.0, Matrix Hybrid 6 KVA-5G, Zeus 5 / 5.5 & 6 kW, Razer 5.2 kVA / 8.2 kVA & 10.2 kVA and 3 phase model names are Fronus 5.5 KTL-X, 11 KTL-X, 15 KTLX-G3, 20 KTLX-G3, 24 KTLX-G3, 30 KTL-G2, 50 KTL, 60 KTL, and 110 KTL.

Fronus Company Detail:

Al Najeebi Electronics Market, 11th Floor, Office No. 1103 and 1104, Saddar, Karachi, Pakistan
Email[email protected]
Punjab & KPK Service Center Complaint Number048-3726700, 0333-2552808
Balochistan & Sindh Service Center Complaint Number0333-2552809
Lahore Address
Office No. 1604, High Q Tower, Jail Road, Lahore
Phone Numder042-35717480-481

Inverex Inverter Models List:

Veyron 1.2kW MPPT
Veyron 2.5kW MPPT
Veyron IV 3.2kW MPPT
Nitrox 5kW SP-5G Hybrid
Nitrox 5kW Hybrid
Veyron 5.2kW MPPT
Nitrox 6kw On-grid
Aerox Plus 5.2KW
Nitrox 10kW On-grid
20KW On-grid


One comment

  1. asalam o aliekum
    i saw the brochor of details of different inverters in website
    its helpful for me to in touch with current price of different variant

Leave a Reply

Your email address will not be published. Required fields are marked *